init Files
This commit is contained in:
218
libraries/TFT_eSPI/TFT_Drivers/ST7735_Init.h
Normal file
218
libraries/TFT_eSPI/TFT_Drivers/ST7735_Init.h
Normal file
@@ -0,0 +1,218 @@
|
||||
|
||||
// This is the command sequence that initialises the ST7735 driver
|
||||
//
|
||||
// This setup information is in a format accepted by the commandList() function
|
||||
// which reduces FLASH space, but on an ESP8266 there is plenty available!
|
||||
//
|
||||
// See ILI9341_Setup.h file for an alternative simpler format
|
||||
|
||||
{
|
||||
// Initialization commands for ST7735 screens
|
||||
static const uint8_t PROGMEM
|
||||
Bcmd[] = { // Initialization commands for 7735B screens
|
||||
18, // 18 commands in list:
|
||||
ST7735_SWRESET, TFT_INIT_DELAY, // 1: Software reset, no args, w/delay
|
||||
50, // 50 ms delay
|
||||
ST7735_SLPOUT , TFT_INIT_DELAY, // 2: Out of sleep mode, no args, w/delay
|
||||
255, // 255 = 500 ms delay
|
||||
ST7735_COLMOD , 1+TFT_INIT_DELAY, // 3: Set color mode, 1 arg + delay:
|
||||
0x05, // 16-bit color
|
||||
10, // 10 ms delay
|
||||
ST7735_FRMCTR1, 3+TFT_INIT_DELAY, // 4: Frame rate control, 3 args + delay:
|
||||
0x00, // fastest refresh
|
||||
0x06, // 6 lines front porch
|
||||
0x03, // 3 lines back porch
|
||||
10, // 10 ms delay
|
||||
ST7735_MADCTL , 1 , // 5: Memory access ctrl (directions), 1 arg:
|
||||
0x40 | TFT_MAD_COLOR_ORDER, // Row addr/col addr, bottom to top refresh
|
||||
ST7735_DISSET5, 2 , // 6: Display settings #5, 2 args, no delay:
|
||||
0x15, // 1 clk cycle nonoverlap, 2 cycle gate
|
||||
// rise, 3 cycle osc equalize
|
||||
0x02, // Fix on VTL
|
||||
ST7735_INVCTR , 1 , // 7: Display inversion control, 1 arg:
|
||||
0x0, // Line inversion
|
||||
ST7735_PWCTR1 , 2+TFT_INIT_DELAY, // 8: Power control, 2 args + delay:
|
||||
0x02, // GVDD = 4.7V
|
||||
0x70, // 1.0uA
|
||||
10, // 10 ms delay
|
||||
ST7735_PWCTR2 , 1 , // 9: Power control, 1 arg, no delay:
|
||||
0x05, // VGH = 14.7V, VGL = -7.35V
|
||||
ST7735_PWCTR3 , 2 , // 10: Power control, 2 args, no delay:
|
||||
0x01, // Opamp current small
|
||||
0x02, // Boost frequency
|
||||
ST7735_VMCTR1 , 2+TFT_INIT_DELAY, // 11: Power control, 2 args + delay:
|
||||
0x3C, // VCOMH = 4V
|
||||
0x38, // VCOML = -1.1V
|
||||
10, // 10 ms delay
|
||||
ST7735_PWCTR6 , 2 , // 12: Power control, 2 args, no delay:
|
||||
0x11, 0x15,
|
||||
ST7735_GMCTRP1,16 , // 13: Magical unicorn dust, 16 args, no delay:
|
||||
0x09, 0x16, 0x09, 0x20, // (seriously though, not sure what
|
||||
0x21, 0x1B, 0x13, 0x19, // these config values represent)
|
||||
0x17, 0x15, 0x1E, 0x2B,
|
||||
0x04, 0x05, 0x02, 0x0E,
|
||||
ST7735_GMCTRN1,16+TFT_INIT_DELAY, // 14: Sparkles and rainbows, 16 args + delay:
|
||||
0x0B, 0x14, 0x08, 0x1E, // (ditto)
|
||||
0x22, 0x1D, 0x18, 0x1E,
|
||||
0x1B, 0x1A, 0x24, 0x2B,
|
||||
0x06, 0x06, 0x02, 0x0F,
|
||||
10, // 10 ms delay
|
||||
ST7735_CASET , 4 , // 15: Column addr set, 4 args, no delay:
|
||||
0x00, 0x02, // XSTART = 2
|
||||
0x00, 0x81, // XEND = 129
|
||||
ST7735_RASET , 4 , // 16: Row addr set, 4 args, no delay:
|
||||
0x00, 0x02, // XSTART = 1
|
||||
0x00, 0x81, // XEND = 160
|
||||
ST7735_NORON , TFT_INIT_DELAY, // 17: Normal display on, no args, w/delay
|
||||
10, // 10 ms delay
|
||||
ST7735_DISPON , TFT_INIT_DELAY, // 18: Main screen turn on, no args, w/delay
|
||||
255 }, // 255 = 500 ms delay
|
||||
|
||||
Rcmd1[] = { // Init for 7735R, part 1 (red or green tab)
|
||||
15, // 15 commands in list:
|
||||
ST7735_SWRESET, TFT_INIT_DELAY, // 1: Software reset, 0 args, w/delay
|
||||
150, // 150 ms delay
|
||||
ST7735_SLPOUT , TFT_INIT_DELAY, // 2: Out of sleep mode, 0 args, w/delay
|
||||
255, // 500 ms delay
|
||||
ST7735_FRMCTR1, 3 , // 3: Frame rate ctrl - normal mode, 3 args:
|
||||
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
|
||||
ST7735_FRMCTR2, 3 , // 4: Frame rate control - idle mode, 3 args:
|
||||
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
|
||||
ST7735_FRMCTR3, 6 , // 5: Frame rate ctrl - partial mode, 6 args:
|
||||
0x01, 0x2C, 0x2D, // Dot inversion mode
|
||||
0x01, 0x2C, 0x2D, // Line inversion mode
|
||||
ST7735_INVCTR , 1 , // 6: Display inversion ctrl, 1 arg, no delay:
|
||||
0x07, // No inversion
|
||||
ST7735_PWCTR1 , 3 , // 7: Power control, 3 args, no delay:
|
||||
0xA2,
|
||||
0x02, // -4.6V
|
||||
0x84, // AUTO mode
|
||||
ST7735_PWCTR2 , 1 , // 8: Power control, 1 arg, no delay:
|
||||
0xC5, // VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
|
||||
ST7735_PWCTR3 , 2 , // 9: Power control, 2 args, no delay:
|
||||
0x0A, // Opamp current small
|
||||
0x00, // Boost frequency
|
||||
ST7735_PWCTR4 , 2 , // 10: Power control, 2 args, no delay:
|
||||
0x8A, // BCLK/2, Opamp current small & Medium low
|
||||
0x2A,
|
||||
ST7735_PWCTR5 , 2 , // 11: Power control, 2 args, no delay:
|
||||
0x8A, 0xEE,
|
||||
ST7735_VMCTR1 , 1 , // 12: Power control, 1 arg, no delay:
|
||||
0x0E,
|
||||
ST7735_INVOFF , 0 , // 13: Don't invert display, no args, no delay
|
||||
ST7735_MADCTL , 1 , // 14: Memory access control (directions), 1 arg:
|
||||
0xC0 | TFT_MAD_COLOR_ORDER, // row addr/col addr, bottom to top refresh
|
||||
ST7735_COLMOD , 1 , // 15: set color mode, 1 arg, no delay:
|
||||
0x05 }, // 16-bit color
|
||||
|
||||
Rcmd2green[] = { // Init for 7735R, part 2 (green tab only)
|
||||
2, // 2 commands in list:
|
||||
ST7735_CASET , 4 , // 1: Column addr set, 4 args, no delay:
|
||||
0x00, 0x02, // XSTART = 0
|
||||
0x00, 0x7F+0x02, // XEND = 127
|
||||
ST7735_RASET , 4 , // 2: Row addr set, 4 args, no delay:
|
||||
0x00, 0x01, // XSTART = 0
|
||||
0x00, 0x9F+0x01 }, // XEND = 159
|
||||
|
||||
Rcmd2red[] = { // Init for 7735R, part 2 (red tab only)
|
||||
2, // 2 commands in list:
|
||||
ST7735_CASET , 4 , // 1: Column addr set, 4 args, no delay:
|
||||
0x00, 0x00, // XSTART = 0
|
||||
0x00, 0x7F, // XEND = 127
|
||||
ST7735_RASET , 4 , // 2: Row addr set, 4 args, no delay:
|
||||
0x00, 0x00, // XSTART = 0
|
||||
0x00, 0x9F }, // XEND = 159
|
||||
|
||||
// Frame control init for RobotLCD, taken from https://github.com/arduino-libraries/TFT, Adafruit_ST7735.cpp l. 263, commit 61b8a7e
|
||||
Rcmd3RobotLCD[] = {
|
||||
3,
|
||||
ST7735_FRMCTR1, 2 , // 1: Frame rate ctrl - normal mode, 2 args
|
||||
0x0B, 0x14,
|
||||
ST7735_FRMCTR2, 2 , // 2: Frame rate ctrl - idle mode, 2 args
|
||||
0x0B, 0x14,
|
||||
ST7735_FRMCTR3, 4 , // 3: Frame rate ctrl - partial mode, 4 args
|
||||
0x0B, 0x14,
|
||||
0x0B, 0x14 },
|
||||
|
||||
Rcmd3[] = { // Init for 7735R, part 3 (red or green tab)
|
||||
4, // 4 commands in list:
|
||||
ST7735_GMCTRP1, 16 , // 1: 16 args, no delay:
|
||||
0x02, 0x1c, 0x07, 0x12,
|
||||
0x37, 0x32, 0x29, 0x2d,
|
||||
0x29, 0x25, 0x2B, 0x39,
|
||||
0x00, 0x01, 0x03, 0x10,
|
||||
ST7735_GMCTRN1, 16 , // 2: 16 args, no delay:
|
||||
0x03, 0x1d, 0x07, 0x06,
|
||||
0x2E, 0x2C, 0x29, 0x2D,
|
||||
0x2E, 0x2E, 0x37, 0x3F,
|
||||
0x00, 0x00, 0x02, 0x10,
|
||||
ST7735_NORON , TFT_INIT_DELAY, // 3: Normal display on, no args, w/delay
|
||||
10, // 10 ms delay
|
||||
ST7735_DISPON , TFT_INIT_DELAY, // 4: Main screen turn on, no args w/delay
|
||||
100 }; // 100 ms delay
|
||||
|
||||
if (tabcolor == INITB)
|
||||
{
|
||||
commandList(Bcmd);
|
||||
}
|
||||
else
|
||||
{
|
||||
commandList(Rcmd1);
|
||||
|
||||
if (tabcolor == INITR_GREENTAB)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
colstart = 2;
|
||||
rowstart = 1;
|
||||
}
|
||||
else if (tabcolor == INITR_GREENTAB2)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
writecommand(ST7735_MADCTL);
|
||||
writedata(0xC0 | TFT_MAD_COLOR_ORDER);
|
||||
colstart = 2;
|
||||
rowstart = 1;
|
||||
}
|
||||
else if (tabcolor == INITR_GREENTAB3)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
colstart = 2;
|
||||
rowstart = 3;
|
||||
}
|
||||
else if (tabcolor == INITR_GREENTAB128)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
colstart = 0;
|
||||
rowstart = 32;
|
||||
}
|
||||
else if (tabcolor == INITR_GREENTAB160x80)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
writecommand(TFT_INVON);
|
||||
colstart = 26;
|
||||
rowstart = 1;
|
||||
}
|
||||
else if (tabcolor == INITR_ROBOTLCD)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
commandList(Rcmd3RobotLCD);
|
||||
}
|
||||
else if (tabcolor == INITR_REDTAB160x80)
|
||||
{
|
||||
commandList(Rcmd2green);
|
||||
colstart = 24;
|
||||
rowstart = 0;
|
||||
}
|
||||
else if (tabcolor == INITR_REDTAB)
|
||||
{
|
||||
commandList(Rcmd2red);
|
||||
}
|
||||
else if (tabcolor == INITR_BLACKTAB)
|
||||
{
|
||||
writecommand(ST7735_MADCTL);
|
||||
writedata(0xC0 | TFT_MAD_COLOR_ORDER);
|
||||
}
|
||||
|
||||
commandList(Rcmd3);
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user